Retrofit Roller Slide

A matrix of small rollers fitted with stainless steel wire dividers, that locks at the front and back of the roller mat and into slots on the top of the shelf front. This prevents wires flexing so bottles stay upright.

A roller slide for small packs such as the 250mm energy cans or 6 pack cartons.

The most common roller slide for mid-range packs such as 600ml bottle and 375ml cans.

A roller slide for tall products above 1 litre.

Used to support the middle of a single Roller Slide at the gravity angle when the shelf cannot be angled ie for Roller Slides on the top of fixed cabinets.

A flat data strip or ticket strip for a 26mm bar code ticket for flat shelves.

Used to support the back of a single Roller Slide at the gravity angle when the shelf cannot be angled ie for Roller Slide on the top of fixed cabinets.

A stainless steel wire divider locking under the roller mat and into the shelf front to prevent flexing.

Small white or black cable ties to fix bottle slides to a wire shelf

A plastic ticket strip that clips to the front of a fridge wire shelf.

A tough polycarbonate shelf front with slotted top to engage the wire divider.

An angle bracket screwed to the rear of the mat to hold the mat on a flat shelf.

A data strip with a 20 degree angle for a 26mm bar code ticket for angled shelves.